What is the difference between a computer and a robot?
The solved synonym is a word that means resolved.
On your Android phone, are you getting a “No command” error? Do you want to know how to solve the no command error on Android? If you answered yes, you are not alone in experiencing such an error.
The recovery mode on an Android phone is used to fix a variety of problems. If your phone begins freezing or has been set incorrectly, you may easily fix the issue by entering recovery mode. It’s usually used to factory reset your phone or clean the cache sector.
However, with Android, no command error in recovery mode may occur at any moment, halting the whole procedure. This issue prevents Android users from accessing the recovery mode.
So, if you’re having the same problem, don’t be concerned. This post will show you how to solve the no command issue in Android recovery mode.
What Does “No Command” Mean in Recovery Mode?
When you attempt to enter your recovery mode or install freshly updated software, you may get a “no command error in recovery mode” error message. Your device may be waiting for this command to merely access the recovery options in many instances.
However, in certain uncommon circumstances, you may get trapped in a boot loop with the Android no command issue that appears every time you start your Android phone.
The following are the most common reasons of no command error in recovery mode:
- When you’ve been refused Super User Access.
- While attempting to restore your Android device’s factory settings
- During the process of upgrading the operating system software, computers often malfunction.
- Interrupting the installation procedure is still going on.
Now that you’ve learned the most frequent causes of this problem, it’s time to understand how to fix Android recovery mode no command.
How Do I Fix The No Command Error In Android Recovery Mode?
In this part of the article, I’ve included some of the most effective methods for troubleshooting Android recovery mode no command issues.
Solution 1: Restart Your Computer
You must be acquainted with this approach, since restarting our devices is one of the oldest strategies for resolving any problem. You’ve probably observed that this solution always works. Rebooting your Android phone may also help you resolve the problem of no command in recovery mode Lenovo k8 note.
So, let’s have a look at the steps listed below:
- To switch off your phone, press and hold the Power and Volume Down keys simultaneously until it goes off.
- Press and hold the Power key until your Android phone turns on and begins to start up.
Solution #2: Unplug your Android phone’s battery.
By removing the battery from your Android phone, you may attempt to solve the fix no command error in recovery mode problem. If your phone’s battery can be replaced, simply remove the back cover by turning your device off and removing the battery.
After some time has passed, re-insert your battery. Check to verify whether the problem has been resolved by turning on your device.
Solution #3: Use Key Combinations to Resolve the No Command Error in Recovery Mode
This error/bug has been reported by a number of users when trying to start up their device in recovery mode. In such a scenario, you must be aware that some of the instructions may be required to proceed.
It simply implies that pressing a sequence of keys may fix the Android recovery mode issue.
Here are the key combination lists that will undoubtedly assist people in resolving the issue. Make sure you’re just holding the keys for 20 seconds.
- Press and hold the Power + Volume Up buttons together at first.
- After that, press and hold the Power + Home + Volume Up buttons one more.
- Press and hold the Power button while also pressing and holding the Volume Down button.
- Then press and hold the Power + Home + Volume Down buttons together.
- Hold down the Power and Home keys at the same time.
Solution #4: Manually install the update
You must manually update your program if you get the error notice after upgrading the software or at the same time.
Begin by following these steps:
- To open it, first use the Volume Down button to get to the “Apply update from cache” option, then hit the Power key again.
- Now you must check if the software update is available or not, choose it, and then hit the Power key again to manually install the update.
- If you continue to get a no command error when flashing a custom ROM,
- Then choose the ‘Updater’ option under “Apply update from external storage.”
Then, pick the program file you’ve just downloaded.
Solution #5: Clear Your Cache Partition
Wiping away the cache partition is one of the easiest methods to fix the ‘No command Android’ problem. Here are the steps you must take:
- Simply go to the option “Wipe cache partition” by using the Volume Down button.
- To confirm cache clearing, hit the Power key one again.
If this method fails to resolve the mobile recovery mode problem, go on to the next option.
Solution #6: Reset Your Phone to Factory Settings
If you’ve tried all of the above-mentioned methods and still can’t solve the problem, it’s time to take drastic steps.
A factory reset on an Android device is a highly inconvenient option. As a result of this, all of your existing data will be permanently erased.
However, if you find yourself in a bad scenario where your phone is stuck in a boot loop, you may need to conduct a factory reset. To do so, follow these steps:
- To begin, switch off the Android phone and simultaneously tap and hold the Volume Up and Power keys.
- When the Android logo appears on your screen, release the Power button but keep pressing the Volume Up key.
- Use the Volume Down key as a navigator to drag your marker down to the wipe data/factory reset option on the Android recovery screen.
- Use the Volume Down key to choose Yes — erase all user data, then confirm with the Power key.
Wait a few moments until the factory reset procedure is finished, then hit the Power key when presented with the option to reboot the system immediately.
Solution #7: Take Your Phone To A Repair Shop
If you are still unable to repair the no command issue in recovery mode after attempting the aforementioned techniques, you should take your Android phone to a service center right away.
I recommend this method since your Android recovery mode no command problem can only be resolved by professionals. They’ll examine your phone and fix the problem in no time.
Option #8: [Automatic method] How Do I Fix The No Command Error In Android Recovery Mode?
Last but not least, Android Repair Tool is another alternative available to you. This is one of the finest and most highly recommended apps for fixing various kinds of problems and faults on Android phones.
The Android recovery mode not functioning issue may be simply solved with the assistance of this great application.
The greatest thing about this program is that it is simple to use and does not need any technical knowledge. Other Android phone problems such as Android black/white screen of death, Android stuck in Boot loop, Android applications constantly crashing, and so on may be easily resolved with this wonderful software.
So, without spending any time, go ahead and download and install Android Repair to fix no command in recovery mode on Android.
The solved app is a tool that allows users to search for the solution of their computer problems.
Frequently Asked Questions
What is the synonym of resolved?
What is the difference between fix and solve?
Fix is a verb meaning to mend or put right. Solve is a noun meaning the process of finding a solution to a problem.
What is the example of solve?
To solve a problem is to find the answer or course of action that will lead to a desired solution.
- solved health
- solved book
- problem solved
- solved website
- solved company